Forecourt
Contains the forms in the Forecourt tab of the Commander Configuration Client.
DCR
Refer to Configuring Dispenser Card Readers
Fuel
Refer to Fuel Configuration
Fuel Prices
Refer to Cash Credit Pricing for more information.
The Pricing Manager form is used to set up fuel pricing, including tier pricing. Tier Two pricing can be set up at any time but does not take effect until the appropriate information is entered in the “Start Tier 2 Pricing” and “Number of Tier Hours” parameters in Fuel > Site Parameters > Fuel Site Parameters.
Select the product, then double-click the Price text boxes and enter the price (0.000 - 9.999). The price of all products changes to match the price entered in the top text box after ENTER is pressed. Prices can be edited if necessary.
When entering a price, take care when placing the decimal point. For example, to change a price to 1.159, enter it as written here. To change a price to 1.500, enter the trailing zeros.
If you only change fuel prices, initialize Fuel Prices for the changes to take effect by selecting:
Forecourt > Initialization > Fuel Prices
If you change other fuel parameters as well as prices, you will need to initialize Fuel and DCRs for the changes to take effect. To do this, select both of the following:
Forecourt > Initialization > Fuel
Forecourt > Initialization > DCRs
Make sure that your fueling positions are not in use when initializing any Fuel Prices, Fuel, or DCRs.
Fuel prices are limited to four characters and a maximum of $9.999 with three decimal places. This section shows how to configure a site to use fuel prices with two decimal places for prices greater than $9.999 per gallon in the $xx.xx format.
Configuring Fuel Prices for 2 Decimal Places
Go to Forecourt > Fuel > Fuel Config Pending > Site Parameters and disable “Force .9 Cents Per Gallon”.
Go to Forecourt > Fuel Prices Pending and change all existing product prices with the third decimal place set to 0 (for example, from $2.152 to $2.150).
Go to Forecourt > Fuel > Fuel Config Pending > Site Parameters and change “PPU Decimal Position” and “Total Decimal Position” to “2”.
Go to Forecourt > Fuel Prices Pending and change product prices per gallon to the
$XX.XXformat for both Tier One and Tier Two prices.
Feature Limitations
Sites can be configured to use fuel prices with either two or three decimal places:
$xx.xxor$x.xxx. Sites cannot have mixed decimal positions while using a single Verifone Commander.At two-decimal sites, prices with three decimal places, such as $4.299, are calculated at the two-decimal amount, such as $4.29.
By default, sites are configured for three decimal places in the
$x.xxxformat.
DCR Keys
Each DCR should be assigned to a DCR key configuration. If a site has a mix of DCRs with and without alphanumeric capabilities, it requires two or more DCR key configurations.
For DCRs with alphanumeric capabilities, select “Enable Alphanumeric.” Leave it cleared for DCRs that accept only numeric input.
Use this form to configure DCR keys for different DCR positions.
Add
Click Add to configure a new DCR Keys layout.
Delete
Select to delete the selected DCR Keys layout.
Label
Enter a label for the new DCR Keys layout.
Enable Alphanumeric
For DCRs with alphanumeric capabilities, select “Enable Alphanumeric” to use the alphanumeric keys layout. Leave this field cleared for DCRs that accept only numeric input.
Assign Positions
Click Assign Positions and select the DCRs that can be used for entering alphanumeric characters. DCRs without alphanumeric capabilities are grayed out.
#Rows
Number of rows for the DCR Keys layout.
#Columns
Number of columns for the DCR Keys layout.
Assign Positions
Select to assign the DCR Keys layout to the DCRs in the site.
Click the keys to configure their values.
DCR Idle Screen
The DCR Idle Screen Configuration form is used to set up what displays on the DCR screen when not in use.
Field/Button
Allowable Value/Function
Add
Click Add to configure a new DCR idle screen.
Delete
Select to delete the selected DCR idle screen.
Name
Enter a name for the DCR idle screen.
DCR Non-Graphic Idle Screen
These are the text lines that appear on a non-graphic DCR’s idle screen.
If it is a 4-Line display DCR, the 4 configured lines appear on the screen, one line each.
If it is a 2-Line or Single-Line display DCR, the 4 lines scroll one after another in that order.
Graphic Enabled
Select this option if the DCR has a Graphic Keypad. If this field is disabled, the panel below shows the “DCR Non-Graphic Idle Screen” configuration. If it is enabled, it shows the “DCR Graphic Idle Screen” configuration.
DCR Graphic Idle Screen
If “Graphics Enabled” is selected, the Graphic Idle Screen configuration opens. The Left and Right keys let the user configure what is displayed on each key. The middle lines let the user display text in the middle for the top two rows and use the bottom two rows for the keys. If the Middle Text Line is configured, the keys on those lines are not displayed on the DCR. When each key button is clicked, the following pop-up is displayed to configure the key.
Softkey Type: Tags the key text as one of the predefined types.
Softkey Text: The text displayed for this key on the DCR. After the text is entered here, the text next to the button changes to match it.
Assign Positions
Select to assign the DCR idle screen to the DCRs in the site.
Outdoor TAVE
Refer to the TAVE Feature Reference documentation for information on this feature.
Cash Acceptor
The Cash Acceptor Configuration form is used to set up and edit cash acceptors at the site. Site Information determines the behavior of all cash acceptors at a site. Attributes determine the behavior of a specific cash acceptor at a specific fueling point.
Select the Cash Acceptor in the list at the bottom of the form, then select the value check boxes that apply to that Cash Acceptor.
Disable If Cheated
Select to turn off a cash acceptor when someone tries to cheat it.
Disable If Paper Low
Select to turn off a cash acceptor if the receipt tape is running out.
Disable If No Printer
Select to turn off a cash acceptor if the printer is not working.
Prompt ‘insert cash’
Select to have the phrase “OR INSERT CASH” appear at the end of the idle prompt.
$1 Bill Enabled
Select to allow acceptance of one-dollar bills.
$2 Bill Enabled
Select to allow acceptance of two-dollar bills.
$5 Bill Enabled
Select to allow acceptance of five-dollar bills.
$10 Bill Enabled
Select to allow acceptance of ten-dollar bills.
$20 Bill Enabled
Select to allow acceptance of twenty-dollar bills.
$50 Bill Enabled
Select to allow acceptance of fifty-dollar bills.
$100 Bill Enabled
Select to allow acceptance of one hundred-dollar bills.
Bill Orientation
This parameter does not apply to Tokheim dispensers.
Select to require that bills are inserted face-up with the black-seal end first.
(If not selected, bills can be inserted face-up in either direction.)
Note: The black seal appears on the front of the bill to the left of the face.
Timeout [Seconds 10-99]
Enter the time (in seconds) between when a customer inserts a bill and when the pump shuts off if no fuel has been pumped (10 - 99).
Cash Acceptor Attributes -
Cash Acceptor
Select the number of the fueling point.
Duplicate Acceptor
Click to copy the current cash acceptor’s attributes to any number of other cash acceptors. In the Duplicating Acceptor form, select the cash acceptor(s) to which you want to copy and click Done Duplicating.
Cash Acceptor In Dispenser
Select to indicate that the fuel pump has a cash acceptor.
Reset Printer Error
Note: This parameter is not currently supported.
Note: Select to enable the printer after the cash acceptor has been disabled and brought back online.
Print Totals Now
Note: This parameter is not currently supported.
Note: Select to print the amount of money in the cash acceptor.
Fuel Tax Exempt
The Fuel Tax Exemption Configuration form allows taxes to be removed from a post-pay fuel sale by setting up one to five fuel tax exemptions. Each exemption can be set up by Amount Per Gallon, by the Tax File Entry set up in Store Operations > Payment > Tax Rates, or by both.
The Fuel Tax Exempt Receipt Lines section is used to enter up to four lines of text that you want to print on the header of Fuel Tax Exemption receipts.
Fuel Tax Exempt Record
Select a record number.
Delete
Select to delete the selected fuel tax exempt record.
Name
Enter a name for the fuel tax exemption. The name appears on receipts and reports.
Amount
Enter the dollar amount per gallon of tax (0.000 – 99.000)
Type
Select the tax type to exempt: Amount Per Gallon – The dollar amount per gallon. Tax File Entry – Taxes applied in Store Operations > Payment > Tax Rates. Both – A combination of Amount Per Gallon and the tax rates entry set up in Store Operations > Payment > Tax Rates.
Signature Line
Select to print the receipt with a signature line to certify the customer’s eligibility for the tax exemption.
Fuel Tax Receipt Lines (1 - 4)
Enter up to four header lines for the fuel tax exemption receipt (alphanumeric, 1 - 10 characters).
Rapid Change Fuel Config
Rapid Change Fuel is configured from Forecourt > Rapid Change Fuel Config.
This feature allows the cashier to quickly change the pump’s service level and auto approval from the POS without changing the fuel configuration in Verifone Commander Configuration Client or requiring manager intervention.
To change the fuel configuration level from the POS, the cashier should access CSR Functions > Fuel Manager > Rapid Change Fuel Configuration.
Unattended DCR
Refer to the Unattended Fueling feature reference documentation for information on this feature.
Last updated