Payware Fleet

Payware Fleet is Read-Only.

Payware Fleet is Verifone’s fleet-processing solution that enables petroleum merchants to accept, validate, and route fleet card transactions—both at the pump and in-store—using secure FEP communication to support driver, vehicle, and purchase-level controls.

Payware Fleet Acquirer Settings

Acquirer settings define the network and host specific configuration values the terminal uses to route and process fleet transactions and any host specific parameters required for proper FEP message formatting and routing.

Field/Button	Description
Network
FEP Enabled	Indicates whether Fleet Enablement Protocol processing is active for fleet transactions
Dealer ID	Identifies the merchant location to the fleet host for proper transaction routing.
Terminal ID	Uniquely identifies the POS terminal within the fleet processing environment.
Acquirer ID	Specifies the acquiring network responsible for handling fleet transaction authorization.
Communication Options
IP/Domain Name	Defines the network address of the fleet host the terminal communicates with.
Port	Defines the network port through which loyalty messages are sent and received.
Enable TLS	Determines whether encrypted TLS communication is used for secure fleet data transmission
Discard	Remove any changes made to this form.
Apply Changes	Save all changes made to this form.

Payware Fleet FEP Parameters

Payware Fleet FEP parameters define the key identifiers and communication settings the terminal uses when sending Fleet Enablement Protocol transactions, ensuring fleet cards, driver and vehicle data, and authorization requests are formatted, routed, and processed correctly by the designated fleet host.

Brand	Identifies the loyalty brand or program the FEP transaction should be routed to.
Transport Protocol Data Unit	Defines the communication format and structure used when sending FEP loyalty messages.
Net International ID	Specifies the network identifier used to route loyalty transactions to the correct host.
Discard	Remove any changes made to this form.
Apply Changes	Save all changes made to this form.

Payware Fleet Product Mapping

Payware Fleet product mapping translates NACS product codes from the POS into the specific Payware Fleet product identifiers required by the fleet host, ensuring that fuel grades and in-store items are categorized correctly so the host can apply the proper purchase controls, limits, and authorization rules.

Field/Button	Description
ID	A unique internal identifier for the product mapping entry.
NACS Code	The standardized NACS product category code received from the POS.
Product Name	The descriptive name of the product associated with the NACS code.
PW Host Code	The Payware Fleet product code used to route and classify the item for fleet authorization.

Payware Fleet FEP Cards

Payware Fleet FEP Cards define which fleet card types the system can recognize and process, along with the rules for how each card is entered, displayed, and handled during Fleet Enablement Protocol transactions.

Field/Button	Description
Card Table Index	Identifies the card entry’s position within the FEP card table.
Card Abbreviation	Enter the abbreviated proprietary card name.
Card Name	Enter the proprietary card name.
Lower ISO	Defines the lowest ISO range value for valid card numbers.
Upper ISO	Defines the highest ISO range value for valid card numbers.
PAN Length	Specifies the required length of the card’s primary account number.
Card Enabled	Determines whether this card type is allowed for fleet processing.
Manual Entry Allowed	Indicates whether the card number may be entered manually.
Card Limits
Print Customer Name	Controls whether the customer’s name prints on receipts.
Fiscal Receipt Enable	Indicates whether the card supports fiscal receipt requirements.
Signature on Financial Advice	Specifies if a signature is required on financial advice messages.
Max Value for Pump Auth	Sets the maximum dollar amount allowed for pump authorization.
Driver ID Prompt Enable	Enables prompting for a driver ID during the transaction.
Driver ID Max Length	Sets the maximum number of characters allowed for the driver ID.
Driver ID Min Length	Sets the minimum number of characters required for the driver ID.
Vehicle ID Prompt Enable	Enables prompting for a vehicle ID during the transaction.
Vehicle ID Max Length	Sets the maximum number of characters allowed for the vehicle ID.
Vehicle ID Min Length	Sets the minimum number of characters required for the vehicle ID.
Odometer Prompt Enable	Enables prompting for an odometer reading.
Odometer Max Length	Sets the maximum number of digits allowed for the odometer entry.
Odometer Min Length	Sets the minimum number of digits required for the odometer entry.
PAN Mask Configuration
Starting Visible Characters	Specifies how many characters at the start of the PAN remain visible.
Ending Visible Characters	Specifies how many characters at the end of the PAN remain visible.