> For the complete documentation index, see [llms.txt](https://commanderhelp.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://commanderhelp.verifone.com/customer-documentation/petro-and-c-store/commander-highlights-user-guides-release-notes-and-certifications/commander-56.03/commander-56.03.03-release-notes/dispenser-card-readers-supported-options/gilbarco.md).

# Gilbarco

###  Gilbarco: FlexPay IV (M7)

{% hint style="info" %}
For Chevron sites, they should use 6.8.2.25-x VIPA. Chevron is not certified for 6.8.2.32. The version to load would be xx.13.10\_US00.05. (xx - being the PCI of the dispenser > PCI 4 being 04 and PCI 5 would be 05. For the version to load, PCI 4.0 would be 42 and PCI 5.0 would be 52.)

If the site has FlexPay IV v42.11.47 or v52.11.47 and debit transactions are receiving an “INVALID PIN” response from the host, Gilbarco has corrected this with the v42.11.53 and v52.11.53 software releases.

Cash Acceptors are not supported with EMV.

GSM, SDES, and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>EMV Support</strong></td><td></td></tr><tr><td valign="top">EMV Contact</td><td>Certified</td></tr><tr><td valign="top">EMV Contactless</td><td>Certified</td></tr><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td></tr><tr><td valign="top">EMV (PCI DSS 5.0) Non-Fleet 2.0</td><td>52.12.45</td></tr><tr><td valign="top">EMV (PCI DSS 4.0) Non-Fleet 2.0</td><td>42.12.45</td></tr><tr><td valign="top">Fleet 2.0 Version (PCI DSS 5.0)</td><td>FPIVOPT_V05.13.10_US00.07</td></tr><tr><td valign="top">Fleet 2.0 Version (PCI DSS 4.0)</td><td>FPIVOPT_V04.13.10_US00.07</td></tr><tr><td valign="top">Fleet 2.0 VIPA</td><td>6.8.2.32 (For Chevron sites, see note below.)</td></tr><tr><td valign="top">Graphics</td><td>42.05.11 - P609</td></tr><tr><td valign="top">Applause (Graphics)</td><td>42.05.11 - P609</td></tr><tr><td valign="top">Cash Acceptors</td><td>42.05.11 - P609</td></tr><tr><td valign="top">Scanner</td><td> </td></tr><tr><td valign="top">Contactless (RFID) with UX 400</td><td>42.05.11 - P609</td></tr><tr><td valign="top"><strong>Debit</strong></td><td></td></tr><tr><td valign="top">Non-Debit</td><td>42.05.11 - P609</td></tr><tr><td valign="top">TDES</td><td>42.05.11 - P609</td></tr></tbody></table>

### Gilbarco: FlexPay II (M5)

{% hint style="info" %}
Gilbarco has announced December 31, 2024 as the end-of-support date for FlexPay 2 (FP2). Software released by Verifone prior to this date may still include FP2 as an install option; however, Verifone will not provide any software corrections for this device. Additionally, the Helpdesk may not be able to offer support for FP2 beyond basic troubleshooting.
{% endhint %}

{% hint style="info" %}
Cash Acceptors are not supported with EMV.

GSM, SDES, and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>EMV Support</strong></td><td></td><td></td></tr><tr><td valign="top">EMV Contact</td><td>Certified</td><td></td></tr><tr><td valign="top">EMV Contactless</td><td>Certified</td><td></td></tr><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td><td></td></tr><tr><td valign="top">EMV</td><td>3.6.06</td><td></td></tr><tr><td valign="top">Graphics</td><td>30.3.03</td><td></td></tr><tr><td valign="top">Cash Acceptors</td><td>30.3.03</td><td></td></tr><tr><td valign="top">Scanner</td><td> </td><td></td></tr><tr><td valign="top"><strong>Debit</strong></td><td></td><td></td></tr><tr><td valign="top">Non-Debit</td><td>30.3.03</td><td></td></tr><tr><td valign="top">TDES</td><td>30.3.03</td><td></td></tr></tbody></table>

### &#x20;Z80 Logic Board

{% hint style="info" %}
Cash Acceptors, GSM, Graphics, Scanner, Contactless (RFID), SDES, TDES, and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td></tr><tr><td valign="top">Debit</td><td></td></tr><tr><td valign="top">Non-Debit</td><td>50.2.4</td></tr></tbody></table>

### Encrypting PIN Pad (EPP) with Advanced GSM

{% hint style="info" %}
An Advanced GSM is not required if EPP is injected with the correct debit key. However, it can be used until the EPPs are injected with the correct debit key.

Master Session and Cash Acceptors are not supported.

Please contact your Gilbarco servicer for the correct setup of the EPP and the mapping of the keypad.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td valign="top"><strong>Minimum Version</strong></td></tr><tr><td valign="top">Advanced GSM</td><td valign="top">See CRIND versions below.</td></tr><tr><td valign="top">Graphics</td><td valign="top"></td></tr><tr><td valign="top">Scanner</td><td valign="top"></td></tr><tr><td valign="top">Contactless (RFID)</td><td valign="top"></td></tr><tr><td valign="top"><strong>Debit</strong></td><td valign="top"></td></tr><tr><td valign="top">SDES (DUKPT)</td><td valign="top">See CRIND versions below.</td></tr><tr><td valign="top">TDES</td><td valign="top"></td></tr><tr><td valign="top"><strong>CRINDs</strong></td><td valign="top"></td></tr><tr><td valign="top">Advantage</td><td valign="top">62.6.10</td></tr><tr><td valign="top">Encore 300</td><td valign="top">62.6.10</td></tr><tr><td valign="top">Encore 500</td><td valign="top">3.1.50</td></tr><tr><td valign="top">Ecilpse</td><td valign="top">3.1.50</td></tr></tbody></table>

### Advantage CRIND (Z180 Logic Board)

{% hint style="info" %}
InfoScreen graphics are supported only in single-line mode. Version 60.7.30 is NOT supported for any mode.

TDES and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th width="358" valign="top"></th><th width="249"></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td></tr><tr><td valign="top">Cash Acceptors</td><td>60.9.40</td></tr><tr><td valign="top">GSM</td><td> </td></tr><tr><td valign="top">Graphics: Monochrome</td><td>609.40</td></tr><tr><td valign="top">Graphics: InfoScreen</td><td>609.40</td></tr><tr><td valign="top">Scanner</td><td>609.40</td></tr><tr><td valign="top">Contactless (RFID)</td><td>609.40</td></tr><tr><td valign="top">Debit</td><td></td></tr><tr><td valign="top">Non-Debit</td><td>60.9.40</td></tr><tr><td valign="top">TDES</td><td>60.9.40</td></tr></tbody></table>

### Encore 300

{% hint style="info" %}
InfoScreen graphics are supported only in single-line mode. Version 60.7.30 is NOT supported for any mode.

TDES and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td><td></td></tr><tr><td valign="top">Cash Acceptors</td><td>60.9.40</td><td></td></tr><tr><td valign="top">GSM</td><td> </td><td></td></tr><tr><td valign="top">Graphics: Monochrome</td><td>609.40</td><td></td></tr><tr><td valign="top">Graphics: InfoScreen</td><td>609.40</td><td></td></tr><tr><td valign="top">Scanner</td><td>609.40</td><td></td></tr><tr><td valign="top">Contactless (RFID)</td><td>609.40</td><td></td></tr><tr><td valign="top"><strong>Debit</strong></td><td></td><td></td></tr><tr><td valign="top">Non-Debit</td><td>60.9.40</td><td></td></tr><tr><td valign="top">TDES</td><td>60.9.40</td><td></td></tr></tbody></table>

### Encore 500/Eclipse

{% hint style="info" %}
Contactless (RFID), TDES and M/S are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th width="249" valign="top"></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td></tr><tr><td valign="top">Cash Acceptors</td><td> </td></tr><tr><td valign="top">GSM</td><td> </td></tr><tr><td valign="top">Graphics: Monochrome</td><td> </td></tr><tr><td valign="top"><strong>Debit</strong></td><td></td></tr><tr><td valign="top">Non-Debit</td><td> </td></tr><tr><td valign="top">SDES (DUKPT)</td><td> </td></tr></tbody></table>

<br>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://commanderhelp.verifone.com/customer-documentation/petro-and-c-store/commander-highlights-user-guides-release-notes-and-certifications/commander-56.03/commander-56.03.03-release-notes/dispenser-card-readers-supported-options/gilbarco.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.