EVPAY 2.06.00 R04
Versions and Information
Release Level
Production
PIN pads
Verifone P400 and M400
Minimum EVPAY Software
2.03.03 R04
Minimum OS Version
VOS2 release 3160800
Payment Kernel
VIPA 6.9.0.8
Target OS
31612700
Target ADK
4.8.21
Target VHQ
3.4.3.0
Release Date
May 12, 2025
Publication Date
May 12, 2025
Important Information
Commander Central Documentation
Commander Central documentation can be found at Verifone Premier Portal > Manage > Petro Downloads > Verifone C-Site Management > Documentation area.
Also, can be found at Commander Central.
Debit Keys
When ordering a Debit Key on the Premier Portal, select “Engage” for the M400 and P400 PIN pads.”
FEP and Kernel Versions for EVPAY 2.06.00 and Higher
Use these kernel versions to decide which one to use when loading the software.
Buypass
7.03r
Chase
7.03r
Chevron
7.03r
HPS NWS
7.03r
HPS VAPS
7.03r
NBS
7.03r
Phillips 66
7.03r
Shell
7.03r
WorldPay
7.03r
Installation Information
Installing a current operating system over OS version 31610800 or lower without an intermediate step-up version may cause the device to fail, requiring it to be sent in for repair. See VASC Field Service Bulletin 0322_002 posted at the Premier Portal under Manage > Petro Downloads > General VASC Info > VASC Bulletins for more details.
If the prompt below “Start install?” is displayed, press “OK”. Do NOT press Add.
Installing VHQ configuration after the EVPAY 2.06.00 Full Installation
Verifone VHQ Upgrade Installation Instructions for Version 2.06.00
Not Communicating to Verifone VHQ
If the customer's PIN pads are not communicating to VHQ, but wish to upgrade to 2.06.00, follow the installation steps via USB upgrade.
If customer wants to go to VHQ on the PIN pad and communicate to Petrohome, guide them to change the setting so that VHQ SAM can be prompted.
If the customer wants to go to VHQ on the PIN pad and talk to their own instance (account), install the VHQ configuration file on the PIN pad with the customer's instance.
Communicating with Verifone VHQ
If the customer's PIN pads are communicating to VHQ, but want to upgrade to 2.06.00, it can be performed through VHQ or USB. With the VHQ configuration file, whether it is Petrohome Configuration file or customer’s own instance (account) configuration file, load the VHQ Configuration file after the installation steps below.
Verifone P400 Full Installation
Use these steps in order to do a full installation of the Verifone EVPAY and components on Verifone P400 PINpad.
Load the OS VOS2 release
Load the OS VOS2 release dl.vos2-prod-Engage-release-31612700.tgz file. If the PIN pad prompts to reboot, select “Yes.”
Installing a current operating system over OS version 30620500 or lower without an intermediate step-up version may cause the device to fail, requiring it to be sent in for repair. See VASC Field Service Bulletin 0322_002 posted at the Premier Portal under Manage > Petro Downloads > General VASC Info > VASC Bulletins for more details.
Load the P400 application
Load the following Verifone P400 file for the application. If the PIN pad prompts to “Run Apps”, press Cancel and then press the Red X button until you return to the Information menu. At the Information Menu, select Exit and then at the prompt, reboot the PIN pad.
Load the Verifone P400 application for 7.03 Kernel Engage_Evpay-2.06.00-r04-Kernel-703--prodsigned.tgz file. If the PIN pad prompts to Reboot, select “Yes.”
Verifone P400 Full Installation
Use these steps in order to do an upgrade of the Verifone EVPAY and components on Verifone P400 PINpad.
Load the P400 application
Load the following Verifone P400 files for the application. If the PIN pad prompts to “Run Apps”, press Cancel and then press the Red X button until you return to the Information menu. At the Information Menu, select Exit and then at the prompt, reboot the PIN pad.
Load the Verifone P400 application for 7.03 Kernel Engage_Evpay-2.06.00-r04-Kernel-703_Upgrade-prodsigned.tgz file. If the PIN pad prompts to Reboot, select “Yes.”
Verifone M400 Full Installation
The package can only be upgraded on M400/P400 PIN pad running EVPAY 2.03.03 R04. Make sure to unzip the files downloaded from the Verifone Premier Portal to obtain the .TGZ file.
Verifone M400 Upgrade Installation
Use these steps in order to do a full installation of the Verifone EVPAY and components on Verifone M400 PINpad.
Load the OS VOS2 release
Load the OS VOS2 release dl.vos2-prod-Engage-release-31612700.tgz file. If the PIN pad prompts to reboot, select “Yes.”
Installing a current operating system over OS version 30620500 or lower without an intermediate step-up version may cause the device to fail, requiring it to be sent in for repair. See VASC Field Service Bulletin 0322_002 posted at the Premier Portal under Manage > Petro Downloads > General VASC Info > VASC Bulletins for more details.
Load the M400 application
Load the following Verifone M400 file for the application. If the PIN pad prompts to “Run Apps”, press Cancel and then press the Red X button until you return to the Information menu. At the Information Menu, select Exit and then at the prompt, reboot the PIN pad.
Load the Verifone M400 application for 7.03 Kernel Engage_Evpay-2.06.00-r04-Kernel-703--prodsigned.tgz file. If the PIN pad prompts to Reboot, select “Yes.”
Verifone M400 Upgrade Installation
Use these steps in order to do an upgrade of the Verifone EVPAY and components on Verifone M400 PINpad.
Load the M400 application
Load one of the following Verifone M400 files for the application. If the PIN pad prompts to “Run Apps”, press Cancel and then press the Red X button until you return to the Information menu. At the Information Menu, select Exit and then at the prompt, reboot the PIN pad.
Load the Verifone M400 application for 7.03 Kernel Engage_Evpay-2.06.00-r04-Kernel-703_Upgrade-prodsigned.tgz file. If the PIN pad prompts to Reboot, select “Yes.”
What’s New In This Release: 2.06.00 Revision 4
Enhancements
System
Support was added for EMV VISA Fleet 2.0.
The scroll bar was changed to the “Green” color.
Last updated