> For the complete documentation index, see [llms.txt](https://commanderhelp.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://commanderhelp.verifone.com/feature-references/features-and-products-references/fleet-cards-general-fuel-configuration-and-usage/using-commercial-fleet-cards/commercial-fleet-prepay-fuel-transaction.md).

# Commercial Fleet Prepay Fuel Transaction

## Pre-authorization

Commercial fleet prepay transactions differ from the normal prepay transactions as the commercial fleet prepay transactions are zero dollar transactions and selection of grades are compulsory before pre-authorization.

1. Trigger Commercial Fleet Prepay transactions by one of the following methods:

* The Comm Fleet Prepay soft key

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/v9H9qBHUzqvhv4yO1Vdx/Unknown%20image)

* Click the Pump icon and then the **Comm Fleet Prepay**button on the express panel in the pump icon on POS.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/v9H9qBHUzqvhv4yO1Vdx/Unknown%20image) ![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/oRwiiICyFdYZQFf83m9s/Unknown%20image)

Select the grades to be fueled and click **Confirm**.

As commercial fleet prepay transactions are zero dollar transactions, the Fuel Grade Currency Limit is set from **Config Client >Forecourt > Fuel > Fuel Config > Fueling Positions** in the **Fuel Limit Settings** section.

Also, the host can set the limit. The limit that becomes applicable is the lower of the two. The host can also put a restriction on which fuel can be bought with a particular commercial fleet card. The fuel the host rejects will not be shown to the user to fuel even if the user selects the fuel.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/a2ZoY9IhiiRvEcrcGw1Q/Unknown%20image)

Follow PIN pad instructions for preauthrization.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/Ecn6gJkIMHgaOAMLSUxO/Unknown%20image)

If the card is configured to give cash advance, the cash advance prompt appears for selection.

There are three ways the cash advance limit is set:

1. Using the cashback amount feilds in Cashback Prompt Amounts section from config client > EPS Configuration > Buypass Configuration >
2. From the host that comes during the pre-authorization response
3. From the DCT table.

Out of these three, the cash advance that appears to the customer is the lowest one. Cash advance is only given after fueling.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/T5Xd2zihk6p7DyQ5Ur1H/Unknown%20image)

Enter cash advance required.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/UCwZ5whFLszxvMmn6ALa/Unknown%20image)

Select **YES**if additional products other than fuel are required for purchase. The host determines based on a particular fleet card what are the merchandise that can be bought and the amount that can be used to buy each category of products. This information comes as a card pre-authorization response from the host. During completion of the transaction, If the product selected is not allowed by the host, an error message is shown. Error messages are also shown if the product amount limit is crossed and if the transaction amount limit is crossed.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/l8ATefoEfvS71fwAQ3oF/Unknown%20image)

Click OK on the **Approved** response from the host.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/teWJN7QogLdIXOozt1f1/Unknown%20image)

## Completing the transaction

If the customer has not opted for cash advance and/or additional products during pre-authorization, sale is completed at the DCR.

If the customer has opted for cash advance and/or additional products during pre-authorization, after fueling, the sale comes due inside. Select the pump to recall the transaction.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/C72CNwtEfLdQcs6BjdWg/Unknown%20image)

Add the additional products and complete the sale. A prompt appears asking if the customer wants the cash advance applied during pre-authorization. Click Yes or No to complete the sale.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/0lMIKBEs2qxm9do2XXHO/Unknown%20image)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://commanderhelp.verifone.com/feature-references/features-and-products-references/fleet-cards-general-fuel-configuration-and-usage/using-commercial-fleet-cards/commercial-fleet-prepay-fuel-transaction.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
