> For the complete documentation index, see [llms.txt](https://commanderhelp.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://commanderhelp.verifone.com/feature-references/features-and-products-references/fleet-cards-general-fuel-configuration-and-usage/using-commercial-fleet-cards/prepay-transaction-with-comdata-cards.md).

# Prepay Transaction with Comdata Cards

## Pre-Authorizing Sale

To launch a prepay transaction using Comdata cards, the process is same till Step 3 in “Commercial Fleet Prepay Fuel Transaction”.

After the customer swipes the comdata card, the customer is asked to enter the unit number.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/iNquQDWWwTq7Zs1gAB3V/Unknown%20image)

Enter **Driver ID** (dynamic prompt from host)

{% hint style="info" %}
*Dynamic prompts can vary depending on the card used.*
{% endhint %}

*Some of the dynamic prompts are optional. Press OK without entering anything for skipping optional prompts.*

*If mandatory prompts are skipped thrice, then the transaction is declined.*

*There is no way other than through experience that a cashier or a customer would know which is an optional prompt.*

*Fiserv supports up to total of 8 prompts (both dynamic and system) in a single transaction*

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/RaKg3BsY8BquTXrXE7iK/Unknown%20image)

The following are the other dynamic prompts from the host that can be shown during a transaction:

* Enter Hubometer Reading
* Enter Reeferhour Meter Reading
* Enter Driver’s License Number
* Enter Purchase Order Number
* Enter Trailer Hub Reading
* Enter Trip number
* Enter Trailer number

After the dynamic prompts, If the card is configured to give cash advance, the cash advance prompt appears for selection.

There are three ways the cash advance limit is set:

* Using the Cashback Amount field in Cashback Prompt Amounts section from **Configuration Client > EPS Configuration > Buypass Configuration**
* From the host response that comes during the pre-authorization request
* From the DCT table.

Out of these three, the cash advance that appears to the customer is the lowest one. Cash advance is only given after fueling.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/jBDxaKivr5aZw0TmmslW/Unknown%20image)

Enter **Cash Advance Amount**

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/ub9vtWubQXbEs9VraNnz/Unknown%20image)

**Cash Advance Receipt**

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/ffZMaaDa4Izu3RPoIo9z/Unknown%20image)

## Completing the transaction

If the customer has not opted for cash advance during pre-authorization, sale is completed at the DCR.

1. If the customer has opted for cash advance during pre-authorization, after fueling, the sale comes due inside. Select the pump to recall the transaction.

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/tDzFiSfkqPGGmVVPHBti/Unknown%20image)

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/P1VLQjTaSYueFX3XMLJh/Unknown%20image)

1. A prompt appears asking if the customer wants the cash advance applied during pre-

authorization\*\*.**Click Yes or No to complete the sale**.\*\*

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/GjIm0eiqaabJo8NqvwRC/Unknown%20image)

**Pre-Authorization Receipt**

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/KNi1DgJY66IBGSxRyOvy/Unknown%20image)

**Sales Completion Receipt**

![](https://content.gitbook.com/content/5nJgnNKJ9ZrZeEdr7pqh/blobs/9rgX16jQ68n5G7tuHMqm/Unknown%20image)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://commanderhelp.verifone.com/feature-references/features-and-products-references/fleet-cards-general-fuel-configuration-and-usage/using-commercial-fleet-cards/prepay-transaction-with-comdata-cards.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
