> For the complete documentation index, see [llms.txt](https://commanderhelp.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://commanderhelp.verifone.com/feature-references/features-and-products-references/full-service-attendant/configuring-full-service-attendant/fep-card.md).

# FEP Card

The FEP Card tab allows card information parameters to be set for each FSA card used on site.

## **Configure a FSA Card**

1\. Select the \[FEP Card] tab from the Full Service Attendant Configuration window.

<figure><img src="https://1800087076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5nJgnNKJ9ZrZeEdr7pqh%2Fuploads%2FXwcwyVDQq4eFg7UjQJI7%2Fimage.png?alt=media&amp;token=8d60855e-f74e-4b6e-9de6-31b0516980ec" alt="" width="563"><figcaption></figcaption></figure>

2\. Select \[Add] before entering card information.

• Delete: Allows existing card information to be deleted.

3\. Configure the Card Information parameters.

| Value                                                                                                                           | Description                                                                                                                                                                                                           |
| ------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Card Information                                                                                                                |                                                                                                                                                                                                                       |
| Card Table Index                                                                                                                | Sets the record number of the FSA card (alphanumeric, ten digits).                                                                                                                                                    |
| This number cannot be changed after a card has been saved.                                                                      |                                                                                                                                                                                                                       |
| Card Abbreviation                                                                                                               | Sets the abbreviation for the given card (alphanumeric, two digits).                                                                                                                                                  |
| Card Name                                                                                                                       | Sets the name of the FSA card (alphanumeric, 12 digits).                                                                                                                                                              |
| Lower ISO                                                                                                                       | Sets the low value of the card range (four digits 0001 - 0015). The entered card number must be greater than or equal to this number to match the table entry. The Card ISO values are supplied by the card provider. |
| When using a Verifone Full Service Attendant Card (PN P040-10-900), do NOT use "==" preceding the lower ISO range for the card. |                                                                                                                                                                                                                       |
| Upper ISO                                                                                                                       | Sets the high value of the card range (four digits 0001 - 0015). The entered card number must be less than or equal to this number to match the table entry. The Card ISO values are supplied by the card provider.   |
| When using a Verifone Full Service Attendant Card (PN P040-10-900), do NOT use "==" preceding the upper ISO range for the card. |                                                                                                                                                                                                                       |
| Pan Length                                                                                                                      | Sets the number of digits the card is assigned (14 digits). Values are supplied by the card provider.                                                                                                                 |
| When using Verifone Full Service Attendant Cards (PN P040-10-900), set the Pan Length to "14".                                  |                                                                                                                                                                                                                       |
| Card Enabled                                                                                                                    | Select to enable the FSA card at the DCR.                                                                                                                                                                             |

4. Select \[Save] to accept, or \[Cancel] to exit without saving changes.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://commanderhelp.verifone.com/feature-references/features-and-products-references/full-service-attendant/configuring-full-service-attendant/fep-card.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
