> For the complete documentation index, see [llms.txt](https://commanderhelp.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://commanderhelp.verifone.com/feature-references/features-and-products-references/incomm/using-incomm/card-activation-deactivation-and-redemption.md).

# Card Activation, Deactivation, and Redemption

### Card Activation

When a customer purchases a card, the cashier must activate it in order for the customer to use it.

* The activation request changes the status of the card to Active.
* The transaction amount is always required for card activation even if the card is pre-denominated.
* InComm sends a message confirming activation success.
* This transaction is supported for all card-based products. There are two ways to activate cards:
* One Step POS Card Activation with or without Pre-validate parameter enabled.
* Two Step POS Card Activation with or without Pre-validate parameter enabled.

#### One Step POS Card Activation

To do One step POS card activation, a cashier at an indoor POS adds a card activation to the merchandise (using the UPC on the card), and the customer pays the required amount. Activate the card as follows:

{% stepper %}
{% step %}
**Initiate Transaction**

Initiate a transaction at the POS.
{% endstep %}

{% step %}
**Scan Barcode**

Scan the card’s bar code.

{% hint style="info" %}
If Pre-validate parameter is enabled, the POS sends a pre-authorization request for activation before totaling and tendering the sale.
{% endhint %}
{% endstep %}

{% step %}
**TOTAL**

Press **\[TOTAL]**, then select **\[CASH]** or **\[CREDIT]**.

{% hint style="info" %}
*If the card is activated, an approved message is displayed on the POP device. If the card activation fails, a failure message displays.*
{% endhint %}

{% hint style="info" %}
If a card activation failed but the payment was successful, merchant has to refund the purchase amount manually. The receipt prints with “EPS Prepaid Processing Failed, Refund Required”. The refund can be done by ringing up a general purpose department which does not have the associated activation product code.
{% endhint %}
{% endstep %}
{% endstepper %}

A receipt prints displaying:

* masked account number
* authorization number
* balance amount

#### Two Step POS Card Activation

To do Two step POS card activation, a cashier adds card activation to the merchandise (using the UPC on the card), and the customer pays the required amount. Perform activation as follows:

{% stepper %}
{% step %}
**Scan Barcode**

Scan the bar code on the card or enter the **\[PLU]**.

{% hint style="info" %}
If Pre-validate parameter is enabled, the POS sends a pre-authorization request for activation before swiping the card.
{% endhint %}
{% endstep %}

{% step %}
**Swipe**

When prompted, swipe the card at the POS.
{% endstep %}

{% step %}
**Total**

Press **\[TOTAL]** > select **\[CASH]** or **\[CREDIT]**.

{% hint style="info" %}
• If the card is activated, an approved message is displayed on the POP device.\
• If the card activation fails, a message displays and a refund is required.
{% endhint %}
{% endstep %}
{% endstepper %}

A receipt prints displaying:

* masked account number
* authorization number
* balance amount
* balance amount

**Example Receipts**

<figure><img src="https://1800087076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5nJgnNKJ9ZrZeEdr7pqh%2Fuploads%2Fjwh1ZxB2eSMw2gp2w97a%2Fimage.png?alt=media&amp;token=a793b1fd-1b34-4920-bd85-d47a11a741fb" alt=""><figcaption></figcaption></figure>

### Card Deactivation

The Card Deactivation transaction request allows a card to be deactivated for a refund or return. When a customer returns a Card purchased earlier, the indoor POS initiates a Card Deactivation transaction request.

#### Card Deactivation Steps

{% stepper %}
{% step %}
**Refund**

From the POS, press **\[REFUND]**.
{% endstep %}

{% step %}
**PLU**

Scan or enter the item **\[PLU]**.
{% endstep %}

{% step %}
**Cash or Credit**

Select **\[CASH]** or **\[CREDIT]**.
{% endstep %}

{% step %}
**Swipe**

Ask the customer to swipe the card on the POP PIN pad to deactivate the card.
{% endstep %}
{% endstepper %}

The POP PIN pad displays an approved deactivation message, and the POS prints a receipt with the deactivation approval.

### Card Redemption

The Card Redemption transaction request is used to perform retail purchases using the available balance on the card, when the total purchase amount is known. The requested redemption amount will be deducted from the existing balance of the card.

An InComm host configuration option is available which can facilitate split-tender redemption transactions. When enabled, if the requested redemption amount is greater than the available card balance, the account balance is reduced to zero and the terminal displays the used balance.

The POS calculates the remaining transaction balance and prompts for another method of payment to complete the sale. This transaction is available for InComm managed Closed Loop cards.

An indoor POS initiates a Card Redemption transaction when a customer makes a merchandise purchase and wants to use the InComm Closed Loop card for payment.

#### Card Redemption Steps

{% stepper %}
{% step %}
**Scan Card**

Scan the card’s barcode and enter the **\[PLU]**.
{% endstep %}

{% step %}
**Total and Credit**

Press **\[TOTAL]** and select **\[CREDIT]**.
{% endstep %}

{% step %}
**Swipe**

Ask customer to swipe card on the POP PIN pad.
{% endstep %}
{% endstepper %}

The POP PIN pad displays an Approved message, and the terminal prints a receipt displaying:

* masked account number
* authorization number
* card balance

#### Card Redemption Lock

The Card Redemption Lock transaction request is used to perform retail purchases using a card when the final purchase amount is not known and the purchase authorization is requested.

When the purchase involves fuel control:

* the transaction is submitted to InComm
* the card is blocked from further use until the terminal receives a Redemption Authorization with an unlock message
* a message is sent indicating the available balance on the card
* the fuel dispenser limit is set to the balance amount

Once the fuel is dispensed and sale is complete, a Card Redemption Authorization with Unlock message is submitted to complete the transaction. This transaction is available for InComm managed Closed Loop cards.

#### Card Redemption Unlock

The Card Redemption Unlock transaction request is sent to InComm to complete a locked Card Redemption. The unlock request must include the actual sale/transaction amount to be deducted from the card.

InComm will deduct the redemption amount from the card balance and unlock the card. The response message will indicate the actual transaction amount and remaining balance.

In the case of an overfill condition at a fuel pump, the response value may be less than the sale amount. This transaction is available for InComm managed Closed Loop cards.

#### Indoor Completion

The Indoor Completion transaction request is initiated after a successful Card Redemption Lock message is received and customer fuels and hangs up the nozzle.

**Indoor Completion Steps**

The cashier claims the fuel sale at the POS. The POP PIN pad displays an Approved message displays on the POP PIN pad.

A receipt prints displaying:

* masked account number
* authorization number

#### Outdoor Completion

The Outdoor Completion transaction request is initiated after a successful Card Redemption Lock message is received.

**Outdoor Completion Steps**

The customer completes fueling. The DCR prints a receipt displaying:

* masked account number
* authorization number


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://commanderhelp.verifone.com/feature-references/features-and-products-references/incomm/using-incomm/card-activation-deactivation-and-redemption.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
