Some content on this site may not be available right now. We are aware and actively monitoring the situation.
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Configure an Open PLU on the Touch Screen

The touch screen configuration is divided into three parts:

  • Panel Configuration

  • Screen Configuration

  • Register Configuration

Register: Each Register/POS can be configured to have one or more screens.

Screens: Each screen has a name and can be configured to have up to three panels. All screens appear as tabs on the register.

User Panel: The area within a screen with these panels is collectively referred to as User Panel.

See the Base 53 and Higher UI User Reference for more information on configuring the Touch Screen UI.

After an Open PLU is created, it must be assigned to a POS touch screen.

1

Touch Screen

From the Verifone Configuration Client, go to: Store Operations > Touch Screen.

2

Panel Configuration

Select Panel Configuration and Item Panel in Panel Configuration.

3

Add Item

Click Add Item to add an open PLU.

4

Type Column

From the type column, select PLU.

5

Open PLU

Select the Open PLU to be added.

The PLU should be created as an Open PLU in Store Operations > PLU.

6

Item Panel

If not already assigned, go to Store Operations > Touch Screen > Screen Configuration to assign the Item Panel with the Open PLU to a screen.

7

Screen

If not already assigned, go to Store Operations > Touch Screen > Register Configuration to assign the screen to a register/POS.

Refer to the Base 53 and Higher UI User Reference for more information on configuring the Touch Screen UI.