> For the complete documentation index, see [llms.txt](https://commanderhelp.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://commanderhelp.verifone.com/feature-references/features-and-products-references/pop-discount/configuring-pop-discount/site-params.md).

# Site Params

From the POP Discount Configuration form, select the **\[Site Params]** tab.

<figure><img src="https://1800087076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5nJgnNKJ9ZrZeEdr7pqh%2Fuploads%2Fx4P5Ym5r0AunobJM9c7v%2Fimage.png?alt=media&amp;token=6efb0251-3a7c-44ed-9735-bbfba043c616" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
When the POP Discount Enabled checkbox is selected, the tabs become active to allow the configuration of POP Discounts. If the checkbox is not selected, the POP Discount feature remains disabled.
{% endhint %}

## Basic POP Discount Mode

The Basic POP Discount Mode discounts the price of the fuel when it is purchased or generates coupons redeemable for merchandise discounts.

{% stepper %}
{% step %}
**Site Params**

From the POP Discount Configuration, select the **\[Site Params]** tab.

<figure><img src="https://1800087076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5nJgnNKJ9ZrZeEdr7pqh%2Fuploads%2F8LDZaBnjBlDppAOJGE9S%2Fimage.png?alt=media&amp;token=c77e229b-afd8-4b74-b472-4ca4e5395b5c" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
**Basic Parameters**

Configure the Basic parameters.

<table><thead><tr><th width="255">Value</th><th>Description</th></tr></thead><tbody><tr><td>Basic</td><td>Initiates the Basic POP Discount Mode.</td></tr><tr><td>POP Discount Enabled</td><td>Enables the POP Discount feature.</td></tr><tr><td>Free Award Security Level</td><td>Sets the security level needed to award a free POP Discount coupon <strong>&#x3C;0 - 9></strong>.</td></tr><tr><td>Prompt For POP Recalc</td><td>Prompt for POP Recalc is ONLY applicable for Ruby and Sapphire. It alerts the cashier that the total is adjusting as the POP Discount is applied to a Post-Pay fuel sale.</td></tr><tr><td>Fuel Low Limit</td><td>Sets the lowest possible value that can be used for the POP Fuel Limit setting on each POP record <strong>&#x3C;$0.00 to $99.99></strong>. Low Limit is ONLY applicable to PLU and Minimum Department Purchase discounts.</td></tr><tr><td>Receipt Promo Type</td><td>Sets the Receipt Promo Type. Unit Price/Gallon: Prints the discount on the receipt as savings in cents-per-gallon (by volume). Total Savings: Prints the discount on the receipt as total savings (by amount).</td></tr></tbody></table>
{% endstep %}

{% step %}
**Configure**

Configure the Fuel & DCR Site Parameters.

<figure><img src="https://1800087076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5nJgnNKJ9ZrZeEdr7pqh%2Fuploads%2FEheQTIpgjtOTqh6hnL8D%2Fimage.png?alt=media&amp;token=df046252-8a59-4697-81dd-09dce729d848" alt=""><figcaption></figcaption></figure>

<table><thead><tr><th width="256">Value</th><th>Description</th></tr></thead><tbody><tr><td>Fuel &#x26; DCR Site Parameters</td><td></td></tr><tr><td>POP Configuration Type</td><td>Sets the POP Configuration Type .</td></tr><tr><td>Prompt For Member ID</td><td>Allows the site to prompt for a membership card, with both inside and outside sales.</td></tr><tr><td>Enable Postpay Member ID</td><td>Allows the customer to scan a membership card and receive a fuel discount at the DCR and inside.</td></tr><tr><td>Enable Card Member ID</td><td>Allows mag-stripe cards to be accepted both inside and at the DCR.</td></tr><tr><td>Enable Scan Member ID</td><td>Allows bar-coded cards to be accepted inside and at the DCRs.</td></tr></tbody></table>

{% hint style="info" %}
If both Enable Card Member ID and Enable Scan Member ID are selected, two POP Discount definitions are required: one for swiping cards, one for scanning cards.
{% endhint %}
{% endstep %}

{% step %}
**Save or Cancel**

Select **\[Save]** to accept, or **\[Cancel]** to exit without saving changes.
{% endstep %}
{% endstepper %}

## Basic + Codes POP Discount Mode

Basic + Codes POP Discount Mode discounts the price of the fuel when it is purchased or generates coupons redeemable for merchandise.

{% stepper %}
{% step %}
**Site Params**

From POP Discount Configuration, select the **\[Site Params]** tab.

<figure><img src="https://1800087076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5nJgnNKJ9ZrZeEdr7pqh%2Fuploads%2FPU0EiQ3Q7KhKXBdwMrlg%2Fimage.png?alt=media&amp;token=63e35805-9646-4607-ad0b-84981044c246" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
**Basic + Codes**

Configure the Basic + Codes parameters.

<table><thead><tr><th width="224">Value</th><th>Description</th></tr></thead><tbody><tr><td>Basic + Codes</td><td>Initiates the Basic + Codes POP Discount Mode.</td></tr><tr><td>POP Discount Enabled</td><td>Enables the POP Discount feature.</td></tr><tr><td>Free Award Security Level</td><td>Assigns a security level needed to award a free POP Discount coupon <strong>&#x3C;0 - 9></strong>.</td></tr><tr><td>Prompt For POP Recalc</td><td>Prompt for POP Recalc is ONLY applicable for Ruby and Sapphire. It alerts the cashier that the total is adjusting as the POP Discount is applied to a Post-Pay fuel sale.</td></tr><tr><td>Fuel Low Limit</td><td>Sets the lowest possible value that can be used for the POP Fuel Limit setting on each POP record <strong>&#x3C;$0.00 to $99.99></strong>. Low Limit is ONLY applicable to PLU and Minimum Department Purchase discounts.</td></tr><tr><td>Program Name</td><td>Determines a program name <strong>&#x3C;1 to 15 characters></strong>.</td></tr><tr><td># of Days POP Code Valid</td><td>Sets the number of days a POP Code is valid.</td></tr><tr><td>Discount ID For Free Code</td><td>Sets the free code <strong>&#x3C;1-20></strong>.</td></tr><tr><td>Receipt Promo Type</td><td>Sets the Receipt Promo Type. Unit Price/Gallon: Prints the discount on the receipt as savings in cents-per-gallon (by volume). Total Savings: Prints the discount on the receipt as total savings (by amount).</td></tr><tr><td>Security to AutoGenerate POP Codes from within Sales</td><td>Sets the security level needed to AutoGenerate POP Discount codes <strong>&#x3C;0 - 9></strong>.</td></tr></tbody></table>
{% endstep %}

{% step %}
**Fuel and DCR**

Configure the Fuel & DCR Site Parameters.

<figure><img src="https://1800087076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5nJgnNKJ9ZrZeEdr7pqh%2Fuploads%2Fn0wFah67PNNYk22FnABi%2Fimage.png?alt=media&amp;token=628b205b-c685-4cb7-8de8-756d1fe45ed0" alt=""><figcaption></figcaption></figure>

<table><thead><tr><th valign="top">Value</th><th valign="top">Description</th></tr></thead><tbody><tr><td valign="top">Fuel &#x26; DCR Site Parameters</td><td valign="top"></td></tr><tr><td valign="top">POP Configuration Type</td><td valign="top">Sets the POP Configuration Type <strong>&#x3C;Standard or Alternate></strong>.</td></tr><tr><td valign="top">Prompt For Member ID</td><td valign="top">Allows the site to prompt for a membership card, with both inside and outside sales.</td></tr><tr><td valign="top">Enable Postpay Member ID</td><td valign="top">Allows the customer to scan a membership card and receive a fuel discount at the DCR and inside.</td></tr><tr><td valign="top">Enable Card Member ID</td><td valign="top">Allows mag-stripe cards to be accepted inside and at the DCR.</td></tr><tr><td valign="top">Enable Scan Member ID</td><td valign="top">Allows bar-coded cards to be accepted inside and at the DCRs.</td></tr><tr><td valign="top"><div data-gb-custom-block data-tag="hint" data-style="info" class="hint hint-info"><p>If both Enable Card and Scan Member ID are selected, two POP Discount definitions are required: one for swiping cards, one for scanning cards.</p></div></td><td valign="top"></td></tr></tbody></table>
{% endstep %}

{% step %}
**Save or Cancel**

Select **\[Save]** to accept, or **\[Cancel]** to exit without saving changes.
{% endstep %}
{% endstepper %}

## Basic + Membership POP Discount Mode

Basic + Membership POP Discount Mode discounts the price of the fuel when it is purchased or generates coupons redeemable for merchandise.

{% stepper %}
{% step %}
From the POP Discount Configuration, select the **\[Site Params]** tab.

<figure><img src="https://1800087076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F5nJgnNKJ9ZrZeEdr7pqh%2Fuploads%2FP4Vtv1PKwzcYe6koRuZK%2Fimage.png?alt=media&amp;token=312490f5-2c03-4bb8-ab86-af7ac4c2a99a" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
Configure the Basic + Membership POP Discount Mode window.

<table><thead><tr><th valign="top">Value</th><th valign="top">Description</th></tr></thead><tbody><tr><td valign="top">Basic + Membership</td><td valign="top">Initiates the Basic + Membership POP Discount Mode.</td></tr><tr><td valign="top">POP Discount Enabled</td><td valign="top">Enables POP Discount at the site.</td></tr><tr><td valign="top">Free Award Security Level</td><td valign="top">Assigns a security level needed to award a free POP Discount coupon <strong>&#x3C;0 - 9></strong>.</td></tr><tr><td valign="top">Prompt For POP Recalc</td><td valign="top">Prompt for POP Recalc is ONLY applicable for Ruby and Sapphire. It alerts the cashier that the total is adjusting as the POP Discount is applied to a Post-Pay fuel sale.</td></tr><tr><td valign="top">Fuel Low Limit</td><td valign="top">Sets the lowest possible value that can be used for the POP Fuel Limit setting on each POP record <strong>&#x3C;$0.00 to $99.99></strong>. Low Limit is ONLY applicable to PLU and Minimum Department Purchase discounts.</td></tr><tr><td valign="top">Program Name</td><td valign="top">Determines a program name <strong>&#x3C;1 to 15 characters></strong>.</td></tr><tr><td valign="top">Receipt Promo Type</td><td valign="top">Sets the Receipt Promo Type <strong>&#x3C;Unit Price/Gallon or Total Savings></strong>. Unit Price/Gallon: Prints the discount on the receipt as savings in cents-per-gallon (by volume). Total Savings: Prints the discount on the receipt as total savings (by amount).</td></tr></tbody></table>
{% endstep %}

{% step %}
**Fuel & DCR Site Parameters**

| Value                                                                                                                                                                                                                                          | Description                                                                                      |
| ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------ |
| Fuel & DCR Site Parameters                                                                                                                                                                                                                     |                                                                                                  |
| POP Configuration Type                                                                                                                                                                                                                         | Sets the POP Configuration Type .                                                                |
| Prompt For Member ID                                                                                                                                                                                                                           | Allows the site to prompt for a membership card, with both inside and outside sales.             |
| Enable Postpay Member ID                                                                                                                                                                                                                       | Allows the customer to scan a membership card and receive a fuel discount at the DCR and inside. |
| Enable Card Member ID                                                                                                                                                                                                                          | Allows mag-stripe cards to be accepted both inside and at the DCR.                               |
| Enable Scan Member ID                                                                                                                                                                                                                          | Allows bar-coded cards to be accepted inside and at the DCRs.                                    |
| <div data-gb-custom-block data-tag="hint" data-style="info" class="hint hint-info"><p>If both Enable Card and Scan Member ID are selected, two POP Discount definitions are required: one for swiping cards, one for scanning cards.</p></div> |                                                                                                  |
| {% endstep %}                                                                                                                                                                                                                                  |                                                                                                  |

{% step %}
**Save or Cancel**

Select **\[Save]** to accept, or **\[Cancel]** to exit without saving changes.
{% endstep %}
{% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://commanderhelp.verifone.com/feature-references/features-and-products-references/pop-discount/configuring-pop-discount/site-params.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
